Emerson Network Power CompactPCI Single Board Computer
Model CPCI-6200

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

• 1.3 or 1.5 GHz Freescale MPC8572 dual core integrated processornn Integrated north bridge in the processor (no frontside bus)
• 2GB or 4GB ECC-protected DDR3-800
• Four on-board Gigabit Ethernet interfaces
• Two serial ports
• One USB 2.0 port
• Support for PICMG 2.16 CompactPCI Packet Switching Backplane specification
• Full PICMG 2.1, R2.0 Hot Swap specification compliance
• PICMG 2.9 System Management specification support
• Two PCI-X/PCI mezzanine card (PMC) site
• One XMC (PCI Express x4) capable
• Optional rear transition module in PICMG 2.16 and rear I/O variants
• PLX6466 PCI-to-PCI bridge technology

Download Datasheet

Emerson Network Power Host-Slot Processor Board
Model CPCI-6020

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

• MPC7410 processor
• High-performance L2 cache
• High-performance, low-latency SDRAM subsystem
• Up to 2GB of ECC protected capacity
• New DMA capability
• Variety of persistent memory types and capacities
• Dual 10/100BaseT Ethernet
• Four optional USB ports (two in the front)
• Two async serial ports, two async/sync serial ports, keyboard and mouse
• Single PMC slot
• PCI Enhanced IDE (EIDE) controller
• and fl oppy disk controller
• On-board debug monitor with self-test diagnostics
• Four 32-bit timers, three watchdog timers

Download Datasheet

Emerson Network Power CPCI Board with PowerPlus II Architecture
Model CPCI-6065

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

The CPCI-6065 product is no longer available for new designs.  The CPCI-6115 product is the recommended alternative for this product.

• MPC7410 or MPC750 class processor
• 1MB or 2MB of L2 cache
• Up to 1.5GB ECC SDRAM, with optional RAM500 memory expansion modules
• Dual 10/100BaseTX Ethernet interface
• Two 32/64-bit PMC expansion slots with front-panel or backplane I/O
• 16MB on-board flash memory for user-specified requirements
• Two 32-pin PLCC/CLCC sockets for flash memory, up to 1MB capacity for on-board firmware or user specified requirements
• Optional Compact Flash memory card socket on accompanying transition module
• On-board debug monitor with self-test diagnostics
• Two USB ports, four async serial ports
• 32KB NVRAM and time-of-day clock with replaceable battery backup
• Four 32-bit timers, one watchdog timer
  

Download Datasheet

3U Conduction cooled cPCI Single Board Computer
Models 6800/6801

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

• MPC7447A 1GHz microprocessor with :
• L1 caches : 32KB Inst. and 32KB Data with parity
• 512KB of L2 integrated cache with ECC
• Or MPC7448 1.4GHz Processor with :
• L1 caches : 32KB Inst. and 32KB Data with parity
• 1 MB of L2 integrated cache with ECC
• 256 or 512MB SDRAM-DDR with ECC
• 64MB soldered Mirror Flash
• Up to 1 GB soldered Nand Flash
• 2 MB (128-bit access wide) of high speed SRAM
• 32K-word of FRAM (non-volatile memory)
• PPC Real Time clock and four 32 bit-timers
• Calendar clock with supercap backup
• Temperature sensor and monitoring
• Marvell DiscoveryTM III system controller:
• Two Ethernet 10/100/1000TX ports with:
• One multi-purpose serial interface on J2
• One USB2 controller with an internal hub
• Two high/full speed ports routed on J2
• 4 GPIO on J2
• One 32/64-bit PMC slot with Pn4 (46 IO) routed on J2

Download Datasheet

6U Conduction cooled cPCI Single Board Computer
Models 6810/6811

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

• MPC7448 running at 667 or 1.4 GHz with:
  • L1 caches : 32KB Inst. and 32KB Data with parity
  • 1MB of L2 integrated cache with ECC
• 512MB , 1 or 2GB of SDRAM-DDR with ECC
• 64, 128 or 256MB of soldered Mirror Flash
• Up to 1 GB soldered Nand Flash
• 256KB (128-bit wide access) of high speed SRAM
• 128KB or 1MB BSRAM (non-volatile memory)
• PPC Real Time clock and four 32 bit-timers
• Calendar clock with supercap backup
• Temperature sensor and monitoring
• 32 or 64-bit CompactPCI bus interface
• two PMC sites with IO routing toward J3 / J5
• Marvell DiscoveryTM III system controller
  • Three Ethernet 10/100/1000TX ports with:
    • support for Jumbo frames
    • Virtual Cable Tester on line
    • Two routed on rear J3 and one on the front panel
• One serial interface for the front console port
• One USB2 controller with two rear and one front port
• GPIO on J3/5
• A four channels SATA controller with two ports on J3 and two ports available through an on-board planar connector
• Rear transition module with rear I/O for 2 GigE RJ45, 2 USB2, 4 RS232/RS422 ports, 2 SATA and one on-board high density connector for the PMC IO

Download Datasheet

Emerson Network Power CPCI Peripheral Slot Compute Board
Model CPCI-6115

Ruggedize your SBC or bundle it in a fully integrated package including mezzanine options and OS integration sold and supported under a single assembly number.

• Up to 1.0 GHz MPC7457 PowerPC® processor with AltiVec™ technology for peak performance
• Up to 2GB DDR ECC memory for peak computation power
• Dual Gigabit Ethernet PICMG2.16 interface connectivity
• Additional Gigabit Ethernet interfaces for increased connectivity
• Two PMC sites for maximum I/O expansion Front panel or backplane I/O for popular chassis support

Download Datasheet