CompactPCI - Rugged and Conduction Cooled
6U CompactPCI - Intel Core 2 Duo
PP531 Rugged Core 2 Duo Processor Single Board Computer
Extended temperature and Conduction Cooled Intel Core 2 Duo processor Dual PMC / XMC 2.26 Single Board Computer
Model PP531/06x
  • -25C to +70C Operating Temperature (E-series)
  • -40C to +85C Operating Temperature (K-series)
  • Rugged Conduction Cooled version (RC-series)
  • 2.26 or 1.86GHz Intel® Core™ 2 Duo processor
  • Supports up to 8 Gbytes DDR3-1066 SDRAM
  • 2 x SATA-300 ports

  • Optional on board hard disk drive
  • On board compact flash socket
  • 4 x USB2.0 ports
  • 4 x 10/100/1000 Ethernet ports supporting dual gigabit PICMG 2.16 R1.0 - Packet Switching Backplane (PSB)
  • 2 x PMC / XMC with front and reas user I/O supporting 32/64-bit, 33/66/100 MHz PCI/PCI-X operation
  • 1 x RS232, RS422 and RS485 serial channel interface
  • PICMG 2.9 R1.0 (System Management Specification) supports on-board Baseboard Management Controller
  • Support for Linux®, Windows® XP, Windows® XP Embedded, Windows® Server 2008 and 2003, QNX® VxWorks® and Solaris™
  • Download Datasheet

 

Extended temperature RoHs compliant 1.5 GHz Intel Core Duo L7400 Single Board Computer
Model PP402/041-E or -K
  • -20C to +70C or -40C to +85C Operating Temperatures
  • 1.5 GHz Intel Core Duo processor L7400
    • 667 MHz Front Side Bus

    • 64 Kbytes of primary (L1) on-die cache

    • 4 Mbytes of secondary (L2) on-die cache

  • Intel® 64-bit Intel® 945GME Express chipset
  • Up to 4 Gbytes DDR2-400 ECC SDRAM
  • 4 x channels supporting 10/100/1000 Ethernet
  • 1 x EIDE and 2 x SATA-150 interfaces
  • Front panel accessible graphics interface
  • 2 x serial interfaces, 16550 compatible UARTs
  • 1 x PMC site: 32/64-bit, 33/66/100 MHz PCI/PCI-X operation and 3.3V signaling levels
3U CompactPCI - PowerPC
3U CompactPCI SBCs MPC 7448 based
3U Conduction Cooled cPCI Single Board Computer
Model 6800 series
  • MPC7447A 1GHz microprocessor with :
    • L1 cache : 32KB Inst. and 32KB Data with parity
    • 512KB of L2 integrated cache with ECC
  • Or MPC7448 1.4GHz Processor with :
    • L1 cache : 32KB Inst. and 32KB Data with parity
    • 1 MB of L2 integrated cache with ECC
    • 256 or 512MB SDRAM-DDR with ECC
    • 64MB soldered Mirror Flash
  • Up to 1 GB soldered Nand Flash
  • 2 MB (128-bit access wide) of high speed SRAM
  • 32K-word of FRAM (non-volatile memory)
  • PPC Real Time clock and four 32 bit-timers
  • Calendar clock with supercap backup
  • Temperature sensor and monitoring
  • Marvell DiscoveryTM III system controller:
  • Two Ethernet 10/100/1000TX ports with:
  • One multi-purpose serial interface on J2
  • One USB2 controller with an internal hub
  • Two high/full speed ports routed on J2
  • 4 GPIO on J2
  • One 32/64-bit PMC slot with Pn4 (46 IO) routed on J2
  • Download Datasheet

6U CompactPCI - PowerPC
Conduction Cooled CPCI SBC MPC7448
6U Conduction cooled cPCI Single Board Computer
Models 6810/6811
  • MPC7448 running at 667 or 1.4 GHz with:
    • L1 caches : 32KB Inst. and 32KB Data with parity
    • 1MB of L2 integrated cache with ECC
  • 512MB , 1 or 2GB of SDRAM-DDR with ECC
  • 64, 128 or 256MB of soldered Mirror Flash
  • Up to 1 GB soldered Nand Flash
  • 256KB (128-bit wide access) of high speed SRAM
  • 128KB or 1MB BSRAM (non-volatile memory)
  • PPC Real Time clock and four 32 bit-timers
  • Calendar clock with supercap backup
  • Temperature sensor and monitoring
  • 32 or 64-bit CompactPCI bus interface
  • two PMC sites with IO routing toward J3 / J5
  • Marvell DiscoveryTM III system controller
    • Three Ethernet 10/100/1000TX ports with:
      • support for Jumbo frames
      • Virtual Cable Tester on line
      • Two routed on rear J3 and one on the front panel
  • One serial interface for the front console port
  • One USB2 controller with two rear and one front port
  • GPIO on J3/5
  • A four channels SATA controller with two ports on J3 and two ports available through an on-board planar connector
  • Rear transition module with rear I/O for 2 GigE RJ45, 2 USB2, 4 RS232/RS422 ports, 2 SATA and one on-board high density connector for the PMC IO