• Meets PCI Mezzanine Card (PMC) IEEE 1386 specification
• Compatible with Motorola PowerPC SBCs and others with PMC sites
• Off-the-shelf PMC modules fit a wide variety of applications
• Reduce development costs of implementing PMC technology
• When used with ACT/Technico's CompactPCI-PMC Adapter (7000 series), functionality can be added without         concern for form factor compatibility
• Custom designs are readily available
• Devices drivers available: VxWorks, LynxOS, Solaris, Linux, and Windows

• Provides a high performance VMEbus interface for two PMC/XMC slots with an increasing of 4x the usable bus bandwidth compared with existing solution
• Standards supported with the VMEbus interface :
• Backward compatible with legacy protocols to preserve the existing VME system
• VME64x extensions
• 2eVME and 2eSST protocols
• Full VMEbus system controller
• Interrupt and Interrupt handling capability
• PMC site one:
• PrPMC or PMC 32/64-bit with PCI 33/66MHz or PCI-X 50/100Mhz
• Compliant with IEEE1386.1
• XMC support via 8-bit parallel RapidIO to the second PMC slot
• VME interface via PCI-X 64-bit bus
• PMC site two:
• PMC 32-bit 33/66MHz or PCI-X up to 100Mhz
• Compliant with IEEE1386.1
• XMC support via RapidIO bus between the two PMCs
• Cyclone FPGA to implement easily specific or customer functions
• LED and Thermal sensor
• 6U-form factor for use in VME or stand-alone systems
   

Download Datasheet

• For use in a lab environment
• Enables use of 32-bit PCI card in a PMC slot
• PCI card plugs in perpendicular to PMC card
• Connector permits short PCI card to plug in without interfering with a
• VME backplane or board front panel
• LEDs monitor power supplies and key PCI signals
• Two versions: 5V and 3.3V

Download Datasheet

• Permits operation of a standard 32 or 64 bit PCI-X card in a PMC slot
• Passive adapter - no software set up required
• Supports "PCI-X Capable" signal allowing use of legacy PCI boards or PCI-X boards
• LEDs monitor power supplies and key signals from the PCI bus

Download Datasheet

• Permits operation of a standard 32 or 64 bit PCI-X card in a PMC slot
• Passive adapter - no software set up required
• Supports "PCI-X Capable" signal allowing use of legacy PCI boards or PCI-X boards
• LEDs monitor power supplies and key signals from the PCI bus
• 10 Watt 5V to 3.3V DC to DC converter
  

Download Datasheet

PCMCIA to PMC Adapter
Model 8073

EOL - Contact Elma regarding replacement products.

• Permits use of a Type I or Type II PCMCIA card in PMC slot 
  
  
   

Download Datasheet

• Permits use of Cardbus and PCMCIA cards in a PMC slot 
  
  
   

Download Datasheet

• 3U CompactPCI Form Factor (100mm high x 160mm deep)
• Only one slot (3U x 4HP) required
• Passive Series Termination
• For use with 32-bit PMCs
• 64 User I/O lines routed to CPCI connector (models 7000-2 and 7000-4)
• 2 Status LEDs: IRQ Request from PMC and PMC Bus Master
• Accepts standard PMC I/O connector through the CPCI front panel
• P/N 7000-1: for use in 64-bit systems; no rear I/O; J1 only
• P/N 7000-2: for use in 32-bit systems; rear I/O; J2 connector
• P/N 7000-3: same as -1, mounted at bottom of 6U Front Panel
• P/N 7000-4: same as -2, mounted at bottom of 6U Front Panel
• Hot Swap version also available - contact sales
  

Download Datasheet

• 6U CompactPCI Form Factor (233.4mm high x 160mm deep)
• Only one slot (6U x 4HP) required
• Two PMC sites accept standard PMC modules through the front panel
• Optional Transition Module supports rear I/O
• Compliant with PICMG 2.1 Hot Swap specification
• Capable of live insertion / extraction of adapter